Separate the left and right parameters in parameter adjustment

[okZserebu]

In some devices, the left and right parameters cannot be properly aligned. I have a Quest Pro where the left eye squint is always more sensitive than the right eye squint. Even with calibration enabled, it only provides slight improvement. So, I hope to adjust the left and right parameters separately in parameter adjustment to improve the situation.

[benaclejames]

Hello,
Have you tried calibration with continuous calibration enabled?
Thanks

[okZserebu]

Hello, Have you tried calibration with continuous calibration enabled? Thanks

Continuous Calibration is on, but it still doesn't help. I even tried modifying the vrcft JSON file and setting it to read-only, but that made the vrcft program itself unstable and prone to crashes. Therefore, I hope to adjust the left and right parameters separately in Parameter Adjustment.

[okZserebu]

Hello, Have you tried calibration with continuous calibration enabled? Thanks

The issue is not with vrcft; Continuous Calibration is actually working well. The problem lies with my device—the starting points of the left and right parameters are difficult to unify. The starting points of the left and right parameters are difficult to unify. When the left parameter reaches 0.3, the right parameter may just begin to trigger. The logic of Calibration should be to set a reasonable curve for the parameter's progression from 0 to 1, but when the parameter is often at 0, adjusting it becomes very difficult.